International System of Units Totally Explained

Everything about The International System Of Units totally explained

The International System of Units (abbreviated SI from the French ) is the modern form of the metric system and is generally a system devised around the convenience of the number 10. It is the world's most widely used system of units, both in everyday commerce and in science. An extensive presentation of the SI units is maintained on line by NIST

, including a diagram

of the interrelations between the derived units based upon the SI units. Definitions of the basic units can be found on this site, as well as the CODATA report listing values for special constants such as the electric constant, the magnetic constant and the speed of light, all of which have defined values as a result of the definition of the metre and ampere.
   The older metric system included several groups of units. The SI was developed in 1960 from the old metre-kilogram-second (mks) system, rather than the centimetre-gram-second (cgs) system, which, in turn, had a few variants.
   The SI introduced several newly named units. The SI isn't static — units are created and definitions are modified through international agreement among many nations as the technology of measurement progresses, and as the precision of measurements improves.
   The system is nearly universally employed, and most countries don't even maintain official definitions of any other units. A notable exception is the United States, which still uses many old units in addition to SI. In the United Kingdom, conversion to metric units is government policy, but the transition isn't yet complete. Those countries that still recognise non-SI units (for example the US and UK) have redefined their traditional non-SI units in terms of SI units.

Realization of units

It is important to distinguish between the definition of a unit and its realization. The definition of each base unit of the SI is carefully drawn up so that it's unique and provides a sound theoretical basis upon which the most accurate and reproducible measurements can be made. The realization of the definition of a unit is the procedure by which the definition may be used to establish the value and associated uncertainty of a quantity of the same kind as the unit. A description of how the definitions of some important units are realized in practice is given on the BIPM website, ť :SI Practical Realization brochure

A coherent SI derived unit is defined uniquely only in terms of SI base units. For example, the coherent SI derived unit of resistance, the ohm, symbol Ω, is uniquely defined by the relation Ω = m² kg s⁻³ A⁻², which follows from the definition of the quantity electrical resistance. However any method consistent with the laws of physics could be used to realize any SI unit.

History

The metric system was conceived by a group of scientists (among them, Antoine-Laurent Lavoisier, who is known as the "father of modern chemistry") which had been commissioned by King Louis XVI of France to create a unified and rational system of measures. After the French Revolution, the system was adopted by the new government. On August 1, 1793, the National Convention adopted the new decimal "metre" with a provisional length as well as the other decimal units with preliminary definitions and terms. On April 7, 1795 (Loi du 18 germinal, an III) the terms gramme and kilogramme replaced the former terms "gravet" (correctly "milligrave") and "grave". On December 10, 1799 (a month after Napoleon's coup d'etat), the metric system was definitively adopted in France.
The history of the metric system has seen a number of variations, whose use has spread around the world, to replace many traditional measurement systems. At the end of World War II a number of different systems of measurement were still in use throughout the world. Some of these systems were metric-system variations, while others were based on the Imperial and American systems. It was recognized that additional steps were needed to promote a worldwide measurement system. As a result the 9th General Conference on Weights and Measures (CGPM), in 1948, asked the International Committee for Weights and Measures (CIPM) to conduct an international study of the measurement needs of the scientific, technical, and educational communities.
Based on the findings of this study, the 10th CGPM in 1954 decided that an international system should be derived from six base units to provide for the measurement of temperature and optical radiation in addition to mechanical and electromagnetic quantities. The six base units recommended were the metre, kilogram, second, ampere, degree Kelvin (later renamed the kelvin), and the candela. In 1960, the 11th CGPM named the system the International System of Units, abbreviated SI from the French name: . The seventh base unit, the mole, was added in 1971 by the 14th CGPM.

Future development

The ISO standard ISO 31 contains recommendations for the use of the International System of Units; for applications in electrical applications additionally the IEC standard IEC 60027 has to be taken into account. As of 2008, work is proceeding

to integrate both standards into a joint standard Quantities and Units in which the quantities and equations used with SI are to be referred as the International System of Quantities (ISQ).

Units

The international system of units consists of a set of units together with a set of prefixes. The units of SI can be divided into two subsets. There are seven base units. Each of these base units is nominally dimensionally independent. From these seven base units several other units are derived. In addition to the SI units there's also a set of non-SI units accepted for use with SI.

Name	Symbol	Quantity
metre	m	length
kilogram	kg	mass
second	s	time
ampere	A	electric current
kelvin	K	thermodynamic temperature
mole	mol	amount of substance
candela	cd	luminous intensity

A prefix may be added to a unit to produce a multiple of the original unit. All multiples are integer powers of ten. For example, kilo- denotes a multiple of a thousand and milli- denotes a multiple of a thousandth; hence there are one thousand millimetres to the metre and one thousand metres to the kilometre. The prefixes are never combined: a millionth of a kilogram is a milligram not a microkilogram.

SI writing style

Symbols don't have an appended period/full stop (.) unless at the end of a sentence.
Symbols are written in upright (Roman) type (m for metres, l for litres), so as to differentiate from the italic type used for variables (m for mass, l for length). By consensus of international standards bodies, this rule is applied independent of the font used for surrounding text.
Symbols for units are written in lower case, except for symbols derived from the name of a person. For example, the unit of pressure is named after Blaise Pascal, so its symbol is written "Pa" whereas the unit itself is written "pascal". All symbols of prefixes larger than 10³ (kilo) are also uppercase.
- The one exception is the litre, whose original symbol "l" is unsuitably similar to the numeral "1" or the uppercase letter "i" (depending on the typeface used), at least in many English-speaking countries. The American National Institute of Standards and Technology recommends that "L" be used instead, a usage which is common in the US, Canada, Australia (but not elsewhere). This has been accepted as an alternative by the CGPM since 1979. The cursive $ell$ is occasionally seen, especially in Japan and Greece, but this isn't currently recommended by any standards body. For more information, see Litre.
The SI rule for pluralising units is that symbols of units are not pluralised, for example "25 kg" (not "25 kgs").
- The American National Institute of Standards and Technology has defined guidelines for using the SI units in its own publications and for other users of the SI. These guidelines give guidance on pluralizing unit names: the plural is formed by using normal English grammar rules, for example, "henries" is the plural of "henry". The units lux, hertz, and siemens are exceptions from this rule: they remain the same in singular and plural. Note that this rule only applies to the full names of units, not to their symbols.
A space separates the number and the symbol, for example "2.21 kg", "7.3 m²", "22 K". Exceptions are the symbols for plane angular degrees, minutes and seconds (°, ′ and ″), which are placed immediately after the number with no intervening space.
Spaces may be used as a thousands separator (1 000 000) in contrast to commas or periods (1,000,000 or 1.000.000) in order to reduce confusion resulting from the variation between these forms in different countries. In print, the space used for this purpose is typically narrower than that between words (commonly a thin space).
Any line break inside a number, inside a compound unit or between number and unit should be avoided, but if necessary the latter option should be used.
The 10th resolution of CGPM in 2003 declared that "the symbol for the decimal marker shall be either the point on the line or the comma on the line". In practice, the decimal point is used in English and the comma in most other European languages.
Symbols for derived units formed from multiple units by multiplication are joined with a space or centre dot (·), for example "N m" or "N·m".
Symbols formed by division of two units are joined with a solidus (⁄), or given as a negative exponent. For example, the "metre per second" can be written "m/s", "m s⁻¹", "m·s⁻¹" or $extstylefrac.$ Only one solidus should be used, for example "kg·m⁻¹·s⁻²" is preferable to "kg/m/s²", and "kg/m·s²" is something else. Many computer users will type the / character provided on computer keyboards, which in turn produces the Unicode character U+002F, which is named solidus but is distinct from the Unicode solidus character, U+2044.
In Chinese, Japanese, and Korean language computing (CJK), some of the commonly used units, prefix-unit combinations, or unit-exponent combinations have been allocated predefined single characters taking up a full square. Unicode includes these in its CJK Compatibility and Letterlike Symbols subranges for back compatibility, without necessarily recommending future usage.
When writing dimensionless quantities, the terms 'ppb' (parts per billion) and 'ppt' (parts per trillion) are recognised as language-dependent terms since the value of billion and trillion can vary from language to language. SI therefore recommends avoiding these terms (External Link). However, no alternative is suggested by the International Bureau of Weights and Measures (BIPM).

Spelling variations

Instead of metre and litre several nations use the American English spellings meter and liter, also corresponding to the official spelling in several other languages, including German, Dutch and Swedish. Moreover, the official US spelling for the SI prefix "deca" is deka.

In some English-speaking countries, the unit "ampere" is often shortened to amp (singular) or amps (plural).

Conversion factors

The relationship between the units used in different systems is determined by convention or from the basic definition of the units. Conversion of units from one system to another is accomplished by use of a conversion factor. There are several compilations of conversion factors; see, for example Appendix B of NIST SP 811. Some examples include:

The many units of time — minute (min), hour (h), day (d) — in use besides the SI second, and are specifically accepted for use according to table 6.

The year is specifically not included but has a recommended conversion factor.

The Celsius temperature scale; kelvins are rarely employed in everyday use.

Electric energy is often billed in kilowatt-hours instead of megajoules.

The nautical mile and knot (nautical mile per hour) used to measure travel distance and speed of ships and aircraft (1 International nautical mile = 1852 m or approximately 1 minute of latitude at the equator). In addition to these, Annex 5 of the Convention on International Civil Aviation permits the "temporary use" of the foot for altitude.

Astronomical distances measured in astronomical units, parsecs, and light-years instead of, say, petametres (a light-year is about 9.461 Pm or about 9 461 000 000 000 000 m).

Atomic scale units used in physics and chemistry, such as the ångström, electronvolt, atomic mass unit and barn.

Some physicists still use the centimetre-gram-second (CGS) units, with their associated non-SI electric units.

In some countries the informal cup measurement has become 250 ml. Likewise, a 500 g "metric pound" is used in many countries. Liquids, especially alcoholic ones, are often sold in units whose origins are historical (for example, beer in pints in the UK, champagne in Jeroboams in France).

In the US blood glucose measurements are recorded in milligrams per decilitre (mg/dL); in Canada, Australia, New Zealand, Oceania and Europe, the standard is millimole per litre (mmol/L) or mM (millimolar).

Blood pressure is measured in mmHg instead of Pa. The fine-tuning that has happened to the metric base-unit definitions over the past 200 years, as experts have tried periodically to find more precise and reproducible methods, doesn't affect the everyday use of metric units. Since most non-SI units in common use, such as the US customary units, are nowadays defined in terms of SI units, any change in the definition of the SI units results in a change of the definition of the older units, as well.

Trade

The European Union has a directive banning non-SI markings after 31 December 2009 on any goods imported into the European Union. This applies to all markings on products, enclosed directions and papers, packaging and advertisements. However, on September 11 2007, the EU announced that the United Kingdom would be excepted from this directive and Imperial measurements would still be permitted indefinitely alongside with the metric system as supplementary indications.

Further Information

Get more info on 'International System Of Units'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://international_system_of_units.totallyexplained.com">International System of Units Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.